Configuring additional file system options – HP StoreAll Storage User Manual
Page 17
Default File Shares dialog box. Use this dialog box to create an NFS export and/or an SMB share
at the root of the file system. The default settings are used. See
and
for more information.
Review the Summary to ensure that the file system is configured properly. If necessary, you can
return to a dialog box and make any corrections.
Configuring additional file system options
The New Filesystem wizard creates the file system with the default settings for several options. You
can change these settings on the Modify Filesystem Properties dialog box, and can also configure
data retention, data tiering, and file allocation. To open the dialog box, select the file system on
the Filesystems panel. Select Summary from the lower Navigator, and then click Modify on the
Summary panel.
The General tab allows you to enable or disable quotas, Export Control, and 32-bit compatibility
mode on the file system.
When Export Control is enabled on a file system, by default, IBRIX 9000 clients have no access
to the file system. Instead, the system administrator grants the clients access by executing the
ibrix_mount
command. Export Control affects only for NFS access for IBRIX 9000 clients.
Enabling Export Control does not affect access from a file serving node to a file system. File serving
nodes always have RW access.
By default, file systems are created in 64-bit mode. If clients need to run a 32-bit application, you
can enable 32-bit compatibility mode. This option is applied to the file system at mount time and
can be enabled or disabled as necessary.
Creating a file system
17