HP Surestore 64 Director Switch User Manual
Page 156
140
Configure Threshold Alerts
6.
Select Next when you are done. A Modify Threshold screen appears where you can
change the % utilization, cumulative minutes for the threshold to occur before
notification, and the time interval for measuring throughput and for alert notification.
7.
Make appropriate changes, then continue through the Modify Threshold screens,
making changes as necessary, until the summary screen appears displaying the alert
configuration.
8.
Perform either of the following steps:
– If you need to change any parameters, select Previous and Next to display the
desired Modify Threshold screen.
– Select Finish when you are done.
Activate or Deactivate Alerts
Use the following steps to activate or deactivate existing threshold alerts. In the active
state, notifications are generated for the alert. In the inactive state, notifications do not
occur.
1.
Select Threshold Alerts from the Configure menu.
The Configure Threshold Alerts dialog box displays. The port’s current state, deactive
or active, is listed under the State column.
2.
To change the state, select the alert by the alert information in the table.
3.
If the alert is active, select Deactivate to change to the deactive state. If the alert is
deactive, select Activate to change to the active state.
Delete Alerts
Use the following steps to delete existing threshold alerts.
1.
Select Threshold Alerts from the Configure menu.
The Configure Threshold Alerts dialog box displays.
2.
Select the alert that you want to delete by selecting the alert information in the table.
3.
Select Delete.