Save or print stored jobs, Configure trays, Change network settings – HP LaserJet M9059 Multifunction Printer series User Manual
Page 169
Save or print stored jobs
Turn on the printer job-storing function, or print a stored job from the computer. You also can delete a
stored print job.
1.
Open the HP Printer Utility.
2.
In the Configuration Settings list, select Stored Jobs.
3.
Perform any of the following tasks:
●
To turn on the job-storing function, select Enable Job Storing, and then click Apply Now.
●
To print a stored job, select a stored job in the list, type the necessary personal identification
number (PIN) in the Enter Secure Job PIN box, type the number of copies that you want in
the Copies To Print box, and then click Print.
●
To delete a stored job, select a stored job in the list, and then click Delete.
Configure trays
Change the default printer tray settings from the computer.
1.
Open the HP Printer Utility.
2.
In the Configuration Settings list, select Tray Configuration.
3.
In the Trays list, select the tray to be configured.
NOTE:
To make the selected tray the default tray for printing, click Make Default.
4.
In the Default Media Size pop-up menu, select the default media size for the tray.
5.
In the Default Media Type pop-up menu, select the default media type for the tray.
6.
Click Apply Now.
Change network settings
Change the network internet protocol (IP) settings from the computer. You also can open the embedded
Web server to change additional settings. For more information, see
1.
Open the HP Printer Utility.
2.
In the Configuration Settings list, select IP Settings.
3.
Change any of the settings in the following pop-up menus or fields:
●
Configuration
●
Host Name
●
IP Address
●
Subnet Mask
●
Default Gateway
ENWW
HP Printer Utility for Macintosh 155