GE JV536HSS - Manual (Page 5)

5
To clean the hood surface, use a hot, damp
cloth with a mild detergent suitable for
painted surfaces. Use a clean, hot, damp
cloth to remove soap. Dry with a dry, clean
cloth.
Do not use steel-wool pads or other abrasive
cleaners. They will scratch the surface. Wipe
with a clean, hot, damp cloth after using
cleansers.
Painted Surfaces
(on some models)
This hood requires two bulbs (not included),
PD[LPXPZDWWV
3XUFKDVHDQGLQVWDOO3$5:0D[LPXP
halogen bulbs.
When replacing a bulb, let it cool first. Make
sure that power to the light has been turned
off. Never allow a hot bulb to come into
contact with water.
WARNING:
To reduce the risk
of electric shock, do not connect electrical
power to the hood without both bulbs in
place.
7RFKDQJHWKHOLJKWEXOEV
Grasp the bulb on the edges and
unscrew it.
Replace with the same size bulb.
CAUTION:
„ Do not touch the hood light bulbs when
they are on. They may be hot enough to
cause injury.
„ The light bulbs operate at extremely high
temperatures. If they shatter, the hot glass
could cause personal injury.
Hood Lights
NOTE: Charcoal filters are not
included with the hood. They
must be ordered from your
GE supplier.
If the model is not vented
to the outside, the air will
be recirculated through
disposable charcoal filters that
help remove smoke and odors.
The charcoal filters should
be replaced when they are
noticeably dirty or discolored
(usually after 6–12 months,
depending on hood usage).
NOTE: DO NOT rinse, or put
charcoal filters in an automatic
dishwasher.
Charcoal Filters
(on some models)
The charcoal filters
cannot be cleaned.
They must be replaced.
For 30 ” hood
models, order Kit no.
WB02X10707.
For 36 ” hood
models, order Kit no.
WB02X10708 .
These kits can be
ordered from your
GE supplier.
The charcoal filters are clipped
inside of each reusable metal
grease filter.
Care and cleaning of the vent hood.
GEAppliances.com
Stainless Steel Surfaces (on some models)
Do not use a steel wool pad; it will scratch
the surface.
To clean the stainless steel surface,
use warm sudsy water or a stainless steel
cleaner or polish. Always wipe the surface in
the direction of the grain. Follow the cleaner
instructions for cleaning the stainless steel
surface.
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer nearest you, please call
RXUWROOIUHHQXPEHU
National Parts Center
800.626.2002
GEApplianceParts.com