Dee Zee DZ16241 - Manual (Page 10)

Loosely attach the rear brace to the mounting bracket using the 8mm bolt [H] and 8mm nut [K]
in the top slot of the mounting bracket.
Use the top slot
in the mounting
bracket.
Push up on the rear brace to put tension on the bolt with the large threaded plate and tighten
8
Push up on the rear brace to put tension on the bolt with the large threaded plate and tighten
with a 13mm socket. Air tools are recomemded for this. Once the rear bolt has been tightened,
tighten the bolt and nut attaching the brace to the mounting bracket using a 13mm socket and wrench.
Slide two square head bolts [J] into the channels on the unerside of the running board.
9
DZ 16241 8 OF 9 2/22/2012