Outback Power Systems AXS Card SunSpec Modbus Interface Installation Instructions User Manual
Axs card sunspec modbus interface, Installation instructions
Advertising
900-0149-01-00 Rev A
1
AXS Card
SunSpec Modbus Interface
Installation Instructions
2. Remove the wiring compartment cover.
CAUTION: Equipment Damage
Observe precautions for handling electrostatic
sensitive devices.
3. Remove the blank AXS Card cover.
1. Remove all sources of power from the
FLEXmax Extreme. Wait 5 minutes.
Advertising
This manual is related to the following products:
Table of contents