AEG KO-LAVAMAT 74335 - Manual (Page 31)

Operating Instructions
31
Fabric softener was not
washed into machine;
drawer
æ for condi-
tioner is filled with wa-
ter.
The conditioner insert has
not been correctly positioned
inside the conditioner com-
partment or is blocked.
Clean the detergent dis-
penser drawer and attach the
conditioner securely.
Washing is heavily
creased. Probably too much washing
was put in the drum.
Follow instructions for the
maximum load quantity (see
Programme Tables). For easy-
care fabrics select the EASY
IRON programme.
Washing has not been
spun properly. Water is
left in the drum.
RINSE display is flash-
ing.
Drain hose is kinked. Remove the kink.
Maximum pump head (outlet
head 1m from unit's floor
surface) exceeded.
Contact your local Service
Force Centre; a conversion
kit is available as a special
accessory for pump heads
over 1m.
Drain pump is blocked.
Switch off the appliance and
pull out the mains plug.
Clean the drain pump.
If siphon is connected: si-
phon blocked.
Clean the siphon.
Problem Possible Cause Solution