Waterloo F1879 - Manual (Page 2)

Hardware Included will depend on the product
purchased:
TOOLS REQUIRED:
1/2 inch wrench
7/16 inch wrench
5/16 inch drill bit
Phillips Screwdriver
Cabinet:
Literature
Hardware bag
Caster pack
SIDE HANDLE ATTACHMENT
Items Needed:
#14 - 10 x 3/4 Phillips Screws (Qty: 4)
Screwdriver
Chest:
Literature
Hardware bag
• Attach the side handle using (4) #14-10x 3/4 Phillips
screws.
NOTE: Not all assembly instructions will apply to your
model.
TO ATTACH CHEST
Process:
· Remove enough drawers to access the top and bottom
mounting surfaces of the units. Refer to drawer removal
instructions.
· Place the chest in the desired location on top of the cabi-
net or intermediate chest and mark the mounting hole
locations onto the cabinet top.
· Remove the chest and drill two 5/16" (8mm) holes
through the top of the cabinet or intermediate chest.
· Secure the units together using two 1/4 - 20 x 5/8"
screws and nuts at each joint. The hardware is provided
in the bag located in the top tray of the chest.
WARNING
Remove wooden work surface or rubber mat, if any,
before attaching chest(s) to the cabinet.
2
HARDWARE ASSEMBLY
CARTON CONTENTS
#14 - 10 x 5/8 Screw (Qty: 16)
1/4 - 20 Nut (Qty: 16)
#14 - 10 x 3/4 Phillips Screw
(Qty: 4)
1/4 - 20 x 5/8 Screw (Qty: 16)
5/16 - 18 x 3/4 Screw (Qty: 16)
5/16 - 18 Nut (Qty: 16)