LBL Lighting FSJ 12v Track Adapter to fit Halo and Juno LED - Manual

Installation Instructions for
Track Adapter 1.0 3TRH009-FJ-_
980FSJTRAK
G P I : ENERAL RODUCT NFORMATION
This product is suitable only for dry locations.
This product must be used only with Fusion Jack fixtures.
Line up the adapter contacts with the track slot. Take note of
the side of the adapter with 2 contacts.
1
Orient the adapter so the side with 2 contacts will be on the
side of the polarity groove when the adapter is locked into the
track.
Turn the adapter 90 degrees clockwise to snap the locking tab
into the track.
SECTION
OF TRACK
TRACK SLOT
ADAPTER
CONTACTS
POLARITY
GROOVE
SIDE WITH
2 CONTACTS
MALE CONNECTOR
FEMALE
CONNECTOR
A SECTION
OF TRACK
Screw the male Fusion Jack connector into the female Fusion
Jack connector.
LOCKING TAB
SAVE THESE INSTRUCTIONS!
Fusion Jack
™
1A
2
G P I : ENERAL RODUCT NFORMATION
This product is suitable only for dry locations.
This product must be used only with Fusion Jack fixtures.
1C
1B
1
3
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.lbllighting.com
© 2014 LBL Lighting.All rights reserved.The "LBL Lighting" graphic is a
registered trademark of LBL Lighting. LBL Lighting reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
1
4
4