AT&T DEFINITY Remote Port Security Device - Manual (Page 55)

B - Block User
Syntax:
b <user_id> [ RETURN ]
Blocks an RPSD Key user from access to the RMATS channel. Both permanent and
non-permanent users may be blocked. In the syntax line above,
b is the command and
<user_id> is the user ID. To determine whether a user is already blocked, or to check the
user IDs, use the List User Table command. See List User Table in this section.
Sample Command and Response:
> b KEY20
JPLock01 445 08/12/90 13:14:22 KEY20 -- User Blocked OK --
>
U - Unblock User
Syntax:
u <user_id> [
RETURN ]
Removes the block placed on an RPSD Key user’s access to the RPSD Lock. Both permanent
and non-permanent users may be unblocked. In the syntax line above, u is the command and
<user_id> is the user ID. To determine whether a user is blocked, or to check the user IDs, use
the List User Table command. See List User Table in this section.
Sample Command and Response:
> u KEY20
JPLock01 446 08/12/90 13:19:22 KEY20 -- User Unblocked OK --
>
RPSD System Administrator Command Set 3-9