Allied Telesis AT-GS950/48 - Manual (Page 364)

Appendix B: AT-GS950/48 Default Parameters
364
Trunk - -
Type 1000TX -
Link Status Down Up/Down
Admin Status Enabled Enabled/Disabled
Mode Auto Auto/10Half/10Full/100Half/100Full/1000Full
Jumbo Enabled Enabled/Disabled
Flow Control Disabled Enabled/Disabled
EAP Pass Disabled Enabled/Disabled
BPDU Enabled Enabled/Disabled
Bridge/Spanning Tree/RSTP
Global RSTP Status Disabled Enabled/Disabled
Protocol Version RSTP STP - Compatible/RSTP
Bridge Priority 0x8000 0x0000-0xF000, step:0x1000
Bridge Hello Time 2 seconds 1 - 10 seconds
Bridge Maximum Age 20 seconds 6 - 40 seconds
Bridge Forward Delay 15 seconds 4 - 30 seconds
Port STP Status Disabled Enabled/Disabled
Port Priority 2 0 - 240, 16 steps
Port Path Cost 2 1 - 200,000,000
Admin/OperEdge False True/False
Admin/OperPtoP False True/False
Migration False True/False
Bridge/Spanning Tree/MSTP
Global MSTP Status Disabled Enabled/Disabled
Maximum MST
Instances 31 1 - 31
Table 10. AT-S116 Version 1.0.0 Management Software Default Settings (Continued)
Parameter
AT-GS950/48
Default Setting
Specifications