Hubbardton Forge 138901 - Manual (Page 4)

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
H U B B A R D T O N F O R G E . C O M
hand-forged, vermont-made lighting and accessories
154 RT. 30 SOUTH • CASTLETON, VERMONT 05735
All designs and images ©1989-2013 Hubbardton Forge ® . All rights reserved.
30867
Assembly & Installation Instructions
Install Glass (Figure 6)
Component Parts
P Glass
Q Glass Ring
R Barrel Nuts (2)
1. Install light bulb (not included).
2. Loosen barrel nuts (2). It is not necessary to remove nuts
completely.
3. Slip glass (P) into glass ring (Q). Raise ring and glass. Slide
largest end of keyholes over barrel nuts. Rotate
ring to secure.
4. Tighten barrel nuts (R).
5. Restore electricity at the main breaker.
A367
Finn Adjustable Pendant 138901 Page 4 of 4
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.
R
R
BULB
(NOT
INCLUDED)
P
Q
(Figure 6)