Sony STR-DN1050 - Manual (Page 253)

MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only)
STR-DN1050:
With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 100 watts per channel minimum RMS power, with
no more than 0.09% total harmonic distortion from 250 milliwatts to rated output.
STR-DN850:
With 6 ohm loads, both channels driven, from 20 – 20,000 Hz; rated 95 watts per channel minimum RMS power, with no
more than 0.09% total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
Mexican model
STR-DN1050:
Minimum RMS Output Power (*1): 95 W + 95 W (6 ohms, 20 Hz – 20 kHz, THD 0.09%)
Stereo Mode Output Power (*1): 110 W + 110 W (6 ohms, 1 kHz, THD 1%)
Surround Mode Output Power (*1)(*2): 145 W per channel (6 ohms, 1 kHz, THD 0.9%)
Other models
STR-DN1050:
Minimum RMS Output Power (*1): 100 W + 100 W (6 ohms, 20 Hz – 20 kHz, THD 0.09%)
Stereo Mode Output Power (*1): 120 W + 120 W (6 ohms, 1 kHz, THD 1%)
Surround Mode Output Power (*1)(*2): 165 W per channel (6 ohms, 1 kHz, THD 0.9%)
STR-DN850:
Minimum RMS Output Power (*1): 95 W + 95 W (6 ohms, 20 Hz – 20 kHz, THD 0.09%)
Stereo Mode Output Power (*1): 110 W + 110 W (6 ohms, 1 kHz, THD 1%)
Surround Mode Output Power (*1)(*2): 150 W per channel (6 ohms, 1 kHz, THD 0.9%)
*1 Measured under the following conditions (Area: Power requirements):
USA and Canadian models: 120 V AC, 60 Hz
Mexican model: 127 V AC, 60 Hz
European and Australian model: 230 V AC, 50 Hz
*2 Reference power output for front, center, surround, surround back and front high speakers. Depending on the sound field
settings and the source, there may be no sound output.
Frequency response
Help Guide
242