Sony STR-DN1050 - Manual (Page 258)

Compatible BLUETOOTH profiles (*2): A2DP (Advanced Audio Distribution Profile), AVRCP 1.3 (Audio Video Remote
Control Profile)
Supported Codecs (*3): SBC (*4), AAC, aptX
Transmission range (A2DP): 20 Hz – 20,000 Hz (Sampling frequency 44.1 kHz)
*1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave
oven, static electricity, cordless phone, reception sensitivity, antenna’s performance, operating system, software application, etc.
*2 BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between devices.
*3 Codec: Audio signal compression and conversion format
*4 Subband Codec
General section
Power requirements
USA and Canadian models: 120 V AC, 60 Hz
Mexican model: 127 V AC, 60 Hz
European model: 230 V AC, 50/60 Hz
Australian model: 230 V AC, 50 Hz
Power consumption
240 W
Power consumption (during standby mode)
STR-DN1050:
0.3 W (When [Control for HDMI], [Pass Through], [Network Standby] (*), and [Bluetooth Standby] are set to [Off], and
the receiver in zone 2 is turned off.)
0.7 W (When [Control for HDMI] is set to [On], [Pass Through], [Network Standby] (*), and [Bluetooth Standby] are set
to [Off], and the receiver in zone 2 is turned off.)
1.3 W (When [Control for HDMI] and [Bluetooth Standby] are set to [On], [Pass Through] and [Network Standby] (*) are
set to [Off], and the receiver in zone 2 is turned off.)
STR-DN850:
0.3 W (When [Control for HDMI], [Pass Through], [Network Standby] (*), and [Bluetooth Standby]are set to [Off].)
0.5 W (When [Control for HDMI] is set to [On], [Pass Through], [Network Standby] (*), and [Bluetooth Standby] are set
to [Off].)
1.0 W (When [Control for HDMI] and [Bluetooth Standby] are set to [On], [Pass Through] and [Network Standby] (*) are
set to [Off].
* For USA and Canadian models only
Dimensions (width/height/depth) (Approx.)
STR-DN1050: 430 mm × 172 mm × 329.4 mm (17 in × 6 7/8 in × 13 in)
STR-DN850: 430 mm × 156 mm × 329.4 mm (17 in × 6 1/4 in × 13 in)
including projecting parts and controls
Mass (Approx.)
STR-DN1050: 10.0 kg (22 lb 1 oz)
247