Sony MZ-RH1 - Manual (Page 48)

Combining tracks
(Combine)
You can erase a track mark to combine the
tracks before and after the track mark.
This function can be set on the recorder only.
Note
You cannot combine tracks if:
• one of the two tracks or the both tracks have been
transferred from the computer.
• one of the two tracks or the both tracks have been
recorded in Hi-MD mode using the MD Simple
Burner software.
• the tracks are recorded in different recording
mode.
1
While playing the track with the
track mark you want to erase, press
 to pause.
2
Find the track mark by moving the
jog lever toward FR slightly.
For example, to erase the third track mark,
find the beginning of the third track.
“00:00” appears in the display. “MARK”
appears in the display for a few seconds.
3
Press T MARK to erase the mark.
“MARK OFF” appears in the display. The
track mark is erased and the two tracks are
combined.

When a track mark is erased when you combine two
tracks, the title and the recording date of the second
track changes to those of the first track.
Notes
• When you erase a track mark between the two
consecutive tracks that are assigned into different
groups, the second track is re-assigned into the
group containing the first track. In addition, if
you combine a track that is assigned to a group
with a track that is not assigned to a group (two
consecutive tracks), the second track takes the
same registration setting as the first track.
• It is recommended that you use the recorder to
combine long tracks recorded in LinearPCM.
Transferring such tracks and combining them on
the computer may require extremely long time.
48
MZ-RH1/MZ-M200.GB.2-669-084-11(1)