Goulds Pumps 3410 - IOM - Manual (Page 13)

GENERAL INFORMATION
PUMP DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
NAMEPLATE INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
PUMP DESCRIPTION
PUMP SERVICES
The Goulds 3410 model line is designed for a wide range
of Industrial, Municipal, and Marine Services to include:
•
Process – Quench Water, Stripper Bottoms, Reboiler
Circulation, and Cooling Tower.
•
Pulp and Paper – Primary and Secondary Cleaner,
Filtrate, Mill Water Supply, and Fan Pump.
•
Primary Metals – Cooling Water, Quench, and
Leaching.
•
Municipal – High Lift, Low Lift, Wash Water, Waste
Water, and Raw Water.
•
Utilities – Cooling Tower, Component Cooling, and
Service Water.
•
Marine – Bilge and Ballast, Cargo, Cooling Service,
and Fire Pump.
CAPABILITIES AND FEATURES
Capabilities. Goulds Model 3410 is a single stage, double
suction pump for capacities to 12,000 GPM (2667 M3/Hr.)
and heads to 530 feet (161 meters). It is designed for
pressure to 175 PSIG (1200 kilopascals) with cast iron and
250 PSIG (1725 kilopascals) with ductile iron or steel, and
temperatures to 350°F (177°C).
Features. Pump sizes with an H designation are designed
for a higher flow than the equivalent size standard pump.
External casing dimensions are the same, but the H pumps
have wider casing cutwaters and impellers.
The complete model line has four different shafts with only
two bearing assemblies. Standard constructions are all iron,
bronze fitted, 316SS fitted, and all 316SS, with other
constructions available upon request.
Right hand rotation is standard with left hand available as
an option. The rotation can be changed in the field without
any additional parts.
Vertical Application. Goulds Model 3410 is available in a
vertical configuration (3410V) (Fig. 1). This arrangement is
ideal for applications with limited space such as shipboard
service. A rugged fabricated steel frame supports the pump
and driver, providing a machined fit for positive alignment
when using standard P-base motors.
DESCRIPTION
!
Leakage of process liquid may result in creating an
explosive atmosphere. Ensure the materials of the
pump casing, impeller, shaft, sleeves, gaskets and
seals are compatible with the process liquid.
Casing - The casing is horizontally split. The upper and
lower halves are held together with capscrews plus studs on
each side of each stuffing box to aid in disassembly/
reassembly. Flanged suction and discharge connections are
located in the lower half of the casing and conform to
ANSI 16.1/16.5 class 125/150. The casing is supported by
integrally cast feet. Separate bearing housings are attached
directly to machined fits in each end of the casing with
capscrews. Fourteen of the 27 casings are double volute as
tabulated on the next page.
3410 IOM 1/2010
11
2
Fig 1