Goulds Pumps 3410 - IOM - Manual (Page 15)

NAMEPLATE INFORMATION
Every pump has a Goulds nameplate that provides
information about the pump. The tags are located on
the pump casing. When ordering parts, you will need to identify the pump model,
size, serial number, and the item number of the required parts.
Information can be taken from the pump casing tags. Item
numbers can be found later on in this manual.
3410 IOM 1/2010
13
Description Fig. No. Example
Pump Casing Tag - provides information
about the pump’s hydraulic
characteristics. Note the format of the
pump size: Discharge x Suction - Nominal
maximum Impeller Diameter in inches.
(Example: 2x3-11) (Fig. 2). Fig. 2
ATEX Tag - If applicable, your pump
unit may have the following ATEX tag
affixed to the pump and/or baseplate. See
the Safety section for a description of the
symbols and codes (Fig. 3). Fig. 3
2