Kramer Electronics SP-14 - Manual (Page 16)

16
4.2. Introduction
The front panel displays information via a 4 line by 40 character display.
Kramer Electronics Ltd.
SP-14
Software Ver:
All data entry is via four direction keys, a Select/Enter key and a Menu/Escape key.
Some adjustments take time for the unit to complete; this will be indicated by the display showing Busy
at the top of the screen. Further adjustments should not be attempted while the screen is showing Busy.
Use the Up and Down arrow keys to scroll to the parameter you need to adjust or the sub menu you
want to enter to the top line of the window.
The LCD has four lines and can show only four menu items. An up arrow and/or down arrow symbol at
the end of line 1 and line 4 indicate there are more menu items available. The parameter or sub menu is
highlighted with a flashing cursor at the right edge of line 1 of the LCD. Pressing Select/Enter key
enables you to adjust a parameter or enter the chosen sub menu. Use the Up/Down or Left/Right keys
to adjust a parameter to the required value. Press the Select/Enter key again when the parameter has
been adjusted to the required value.
[MEMC FRC Settings ]
Time Code Settings
Input Select 3G-SDI 1
Input Adjust >
Some adjustments take effect immediately, but others do not take effect until the Select/Enter key is
pressed for a second time. The changed settings are saved into non-volatile memory when the
Select/Enter key is pressed for the second time.
Some adjustments are not applicable to all signal types or operating modes, in which case those non-
applicable functions will not be accessible via the menus.
Special key combinations:
Press right arrow key at power up:
Enter Update Mode
Press up arrow key at power up: Reset to factory defaults
While the menu is inactive, press right
and left arrow key simultaneously:
Toggle through MCFRC demo modes
1
st
press: Video image tiled horizontally, right half w/ MCFRC
processing, left half drop and repeat
2
nd
press: Video image tiled vertically, upper half w/ MCFRC
processing, lower half drop and repeat
3
rd
press: Demo mode off again
The area with MCFRC processing is surrounded by a grey
rectangular frame.