Kramer Electronics SP-14 - Manual (Page 8)

8
1.1.2. Rear Panel conectivity
SP-14 uses a very high performance video input front end including true component video support in
analogue YPbPr and RGBS formats and SDI/HD-SDI/3G-SDI digital formats as well as dual composite
(CVBS) and a Y/C S-Video input. A very high performance video decoder is utilised with 4x
oversampling and 3D Y/C cross talk filter for outstanding video image clarity. HDMI and DVI video with
HDCP encryption is supported as well as analogue RGBHV graphics input.
The output format can be set to a great number of different standard video modes from NTSC to 1080P
modes performing time base correction or the output can be genlocked to the incoming video signal.
Outputs are available in analogue component, DVI digital and 3G-SDI formats which are useable
simultaneously. Note that if an HDCP encrypted signal is connected to the HDMI or DVI input, the DVI
output signal will be similarly HDCP encrypted and the other outputs will be disabled.
1: HDMI input 2: DVI-D input 3: 2x 3G-SDI inputs 4: RBGHV input
5: YPbPr/RGBS input 6: Y/C and 2x CVBS inputs 7: YPbPr output
8: Control Ports (RS232, TCP/IP and USB) 9: 3G-SDI output 10: DVI/HDMI output
11: Analogue Genlock input and output 12: SDI Genlock input and output
13: 4x/4x AES audio inputs (top)/ outputs (bottom) 14: Dual redundant power supply
1.2. Packing List
SP-14 is supplied with the following
1) This manual
2) 3 pin plug IEC mains cable
3) DVI-D output cable
1 2 3
7
5 6 8 9 10
0 12 11
13
14
14
3
4