iRobot Mint 5200 - Manual (Page 25)

PAGE 25
Trouble Shooting
Solution
Confirm the unit is powered on (a blue light will appear under the power button,
bottom center. If a red light appears, the cleaner requires charging before it
can clean).
Make sure the removable cleaning pad is securely attached and that the cleaning
cloth is tucked cleanly into the gripping strips or onto the velcro strips.
If the power is on, press the sweep button to clean with a dry cloth or the mop
button to clean with a wet cloth. Mint Plus should start cleaning in 2-3 seconds.
Mint Plus requires the NorthStar Navigation Cube to maximize its cleaning area.
Make sure the Cube is in the area you want to clean.
Confirm the NorthStar Navigation Cube is on. A blue light will appear in one corner if
the power is on.
Check the position of the NorthStar Navigation Cube to make sure there is
no interference.
The Cube should have a clear view of the ceiling. Place the Cube in an open
area without a cabinet overhang or shelf directly above it.
If there is a moving ceiling fan above the Cube, turn the fan off or move the
Cube so it is not beneath the fan.
If the ceiling is high or uneven, try moving the Cube to an area with a lower and
more even ceiling.
If the Cube is close to a wall, make sure the blue light faces away from the wall
and into the room.
Do not move the Cube during the cleaning cycle.