Lenovo ThinkServer TD350 - Manual (Page 36)

Potential system error (system health LED: amber) Solution
A power cord has been disconnected or a redundant
power supply has been removed. 1. Ensure that the power supplies are installed securely.
2. Ensure that the power cords are connected securely
to the power supplies.
3. Install a new power supply to replace the removed
one.
The system is overheated. Check the BMC for errors and then check the system
fans.
6 USB 2.0 connectors (2)
Used to connect USB devices (USB 1.0, USB 1.1, and USB 2.0 compatible), such as a USB keyboard,
mouse, scanner, or printer. If you have more than six USB devices, you can purchase a USB hub, which
you can use to connect additional USB devices.
Rear view of the server
Note: Depending on the model, your server might look slightly different from the illustration in this topic.
Figure 5. Rear view of the server with two hot-swap redundant power supplies
1 Hot-swap power supplies (2) 2 ID LED
3 VGA DB-15 connector 4 PCIe card slots (3)
5 USB 3.0 connectors (4) 6 Ethernet RJ-45 connector 0
7 Ethernet RJ-45 connector 2 8 Ethernet RJ-45 connector 1
9 Server cover key 10 Serial connector
11 PCIe card slots (4)
22 ThinkServer TD350 User Guide and Hardware Maintenance Manual