Lenovo ThinkServer RD650 User Manual
Page 127
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Prepare your server. See “Removing or extending the server from the rack cabinet” on page 69.
3. Remove the server cover. See “Removing the server cover” on page 69.
4. Remove the riser card assembly 1. See “Replacing the riser card” on page 85.
5. Touch the static-protective package that contains the TSM Premium to any unpainted surface on the
outside of the server. Then, take the TSM Premium out of the package.
6. Locate the TSM Premium connector on the system board and then insert the TSM Premium into the
TSM Premium connector.
Note: Ensure that the TSM Premium is securely seated on the system board.
Figure 86. Installing the TSM Premium
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to “Completing the parts replacement” on page 183. Then,
refer to the ThinkServer System Manager User Guide, which is available for download at
, for more information about server remote management.
Removing the TSM Premium
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 67.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• If you remove the TSM Premium, the iKVM function for server remote management will be unavailable.
• Use any documentation that comes with the TSM Premium and follow those instructions in addition to
the instructions in this topic.
• Depending on the model, your server might look slightly different from the illustration in this topic.
To remove the TSM Premium, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
.
113