Konica Minolta bizhub 652 - Manual (Page 18)

3 Using AU-201H Authentication Unit
18 AU-201H
Reminder:
• Do not connect other USB devices to the same port where this device is
connected. If enough USB power is not provided, this device may not operate
correctly.
• When using a USB hub, be sure to use a self-powered USB hub that can provide
500 mA or more.
• After connecting this device, wait at least 5 seconds before operating it.
4
Start up Data Administrator, and then import the device information for the
multifunctional product.
– For details on importing the device information, refer to the User’s Guide
for Data Administrator.
The Device information pane appears.