4 option settings, Registering a frequently used destination, Using the wins server – Konica Minolta bizhub 4750 User Manual

Page 44: Using the direct hosting smb service, Using llmnr, Using in the dfs environment

Advertising
background image

[Scan Functions]

3-13

3.2

Preparation for SMB Send

3

3.2.4

Option settings

Registering a frequently used destination

Pre-register frequently-used computers and servers as destinations on this machine; it will save having to
carry out many steps in order to enter an address for each transmission.

For details on how to register it, refer to page 10-2.

Using the WINS server

If WINS (Windows Internet Name Service) is used to communicate with a device on the network, register the
WINS server.

For details on the registration procedure, refer to Chapter 2 "Configuring the Operating Environment of This
Machine" in [User's Guide: Applied Functions].

Using the direct hosting SMB service

When using the direct hosting SMB service to communicate with a device on the network, enable the direct
hosting SMB service. (You can use this function with the default settings unless otherwise requested.)

A communication destination can be specified using the IP address (IPv4 or IPv6) or host name. In the IPv6
environment, be sure to enable this service.

For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Ma-
chine" in [User's Guide: Applied Functions].

Using LLMNR

When using LLMNR (Link-local Multicast Name Resolution) to communicate with a device on the network,
enable LLMNR. (You can use this function with the default settings unless otherwise requested.)

LLMNR is a protocol to resolve the name of the device on the network in a local network environment with
no DNS server. It is available in Windows Vista or later.

For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Ma-
chine" in [User's Guide: Applied Functions].

Using in the DFS environment

If DFS (Distributed File System) is installed in your environment, enable DFS. (You can use this function with
the default settings unless otherwise requested.)

For details on the setting procedure, refer to Chapter 2 "Configuring the Operating Environment of This Ma-
chine" in [User's Guide: Applied Functions].

Advertising
This manual is related to the following products: