Installing the scanner driver (mac os), Network utility setting – Konica Minolta bizhub 4750 User Manual

Page 88

Advertising
background image

[Scan Functions]

9-4

9.2

Preparation for TWAIN/WIA scanning

9

3

Click [Next].

4

Read the license agreement, select [I accept the terms of the license agreement], then click [Next].

5

Select this machine from the device list, then click [OK].

% If this machine is not found in the device list, click [Update] or select [Specify IP address], then enter

the IP address of this machine.

6

Click [Finish].

Installation of the scanner driver is then completed.

Installing the scanner driver (Mac OS)

Install the scanner driver from the CD-ROM supplied with this machine to a computer.

0

Administrator privileges are required to perform this task.

0

Use the Driver & Utilities CD-ROM.

1

Insert the CD-ROM for the scanner driver into the CD-ROM drive of the computer.

2

Double-click the CD icon shown on the desktop, then double-click the pkg file in the [Drivers] - [Mac] -
[Scanner] folder.

The scanner driver installer starts.

3

Click [Continue].

4

Click [Continue].

5

Read the license agreement, then click [Continue].

6

Click [Agree].

7

Click [Install] in the standard installation or easy installation window.

% If the authentication window appears, enter the name and password of the computer administrator.

8

Then, click [OK] or [Install Software].

9

Click [Close].

Installation of the scanner driver is then completed.

Network Utility setting

The Network Utility is used to specify the IP address when using the scanner connected to the network. The
Network Utility is installed on the computer at the same time as the scanner driver is installed.

If you do not specify the IP address when installing the scanner driver, or if you change the IP address of this
machine after installing the scanner driver, specify the IP address using Network Utility.

1

Start Network Utility.

% In a Windows environment, open the Start menu, click [All Programs] (or [Programs]) - [KONICA MI-

NOLTA] - Model name of this machine - [Scanner], then start Network Utility.

% In a Mac OS environment, open [Library] - [Applications Support] - [KONICA MINOLTA] in [Macin-

tosh HD] (hard disk of the system), click the folder which has the model name of this machine, then
start Network Utility.

% If it is necessary to specify the IP address when using TWAIN scanning, Network Utility starts when

you attempt to start the scanner driver from the application software.

2

Select this machine from the device list, then click [OK].

% If this machine is not found in the device list, click [Update] or select [Specify IP address], then enter

the IP address of this machine.

Advertising
This manual is related to the following products: