Konica Minolta bizhub 160 - Manual (Page 103)

4 Using scan to e-mail operations
4-16 SU-502
Us
ing s
c
an t
o
e-
ma
il ope
ra
tio
n
s
Ch
apte
r 4
4.3 Specifying the destination using speed dial numbers
2
Note
The speed dial setting must have already been specified.
For information on setting up speed dial numbers, refer to “Adding des-
tinations” on page 3-36.
Ho to use speed dial numbers
1
Press the [Scan] key.
The machine enters Scan mode, and the scan screen appears.
2
Press the [Speed Dial] key, and then
use the 10-key pad to enter the 3-
digit speed dial number programmed
with the e-mail address where you
want to send the scan data.
– If you make a mistake, press the
[No/C] key, and then enter the
correct number.