Konica Minolta bizhub C650 - Manual (Page 60)

C650 2-28
Transmission 2
2.8 Send a fax with Program destination
When the program destination is registered, a fax can be sent by specifying the registered program button.
If transmission settings (Original type and original specification etc.) are registered by a program button, a fax
can be sent only by touching that button without specifying function settings at each time.
The transmission is possible once after registering group button in 1 program button.
Sending a fax after specifying program destination
1
Press [Fax/Scan] key to display the Fax/Scan screen.
2
Load the original.
– Refer to "Loading the original" on page 2-9 for details on positioning the original.
3
Press [Mode Memory] key.
4
Touch [Page List].