Xes feature key instructions – Xerox Stampante Xerox 8830 con AccXES Controller serial number N5T-16835 User Manual
Page 12
Advertising
XES FEATURE KEY INSTRUCTIONS
701P39462 12/02
Page 12
Re-enabling Of Features When The IOT HW (Hardware) and/or
Advanced Network HW Address Has Changed
If your Advanced Network HW Address, as shown on the Printer
Configuration Test Print has changed, you must perform the following
steps:
1. In the United States only, call Customer First at 1 877-XES-DNCS. If you are
outside the United States, please contact your support representative for
feature key instructions.
2. Refer
to
Redeem a Coupon for a Feature Key (With Internet Access and
AccXES System Software Versions 8.0 or Greater)
Advertising
This manual is related to the following products: