Xes feature key instructions – Xerox Stampante Xerox 8830 con AccXES Controller serial number N5T-16835 User Manual
Page 16
Advertising
XES FEATURE KEY INSTRUCTIONS
701P39462 12/02
Page 16
Moving a Feature Key to another AccXES System (Software
Versions 8.0 or Greater)
To move a Feature from one AccXES System to another, perform the
following steps.
NOTE This procedure cannot be done on AccXES System software versions prior
to version 8.0.
1. On the AccXES System that is to have a Feature removed, perform the
“Uninstall a Feature Key” procedure to remove the Feature(s).
2. For each feature(s) that is to be uploaded on the new AccXES System, follow
the instructions in the section of this document entitled “Redeem a Coupon for
a Feature Key (With Internet Access and AccXES System Software Versions
8.0 or Greater)”. You will be using the re-enabled Coupon ID(s).
Advertising
This manual is related to the following products: