Avaya Cajun P882 - Manual (Page 327)

Cajun P550/P880/P882 Switch User Guide
Configuring the OSPF Routing Protocol
11-9
Modifying OSPF
Interfaces Using
the CLI To modify an OSPF interface using the CLI, enter the following
command from Configure Interface mode:
>(configure interface) <interface name> ip ospf <options>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
Creating OSPF Virtual Links
You can create OSPF Virtual links using either the web agent or the
CLI.
Creating OSPF
Virtual Links
Using the Web
Agent To create a OSPF virtual link using the web agent:
1. Select Virtual Links from the Routing > IP > OSPF group on
the web agent window. The OSPF Virtual Links dialog box
opens (Figure 11-5).
Note: The OSPF dialog box displays only if OSPF virtual
links were previously configured.
Figure 11-5. OSPF Virtual Links Dialog Box