Setting the audio options, Listening to your system 05 – Pioneer VSX-519V-K User Manual
Page 30
Listening to your system
05
30
En
Setting the Audio options
There are a number of additional sound
settings you can make using the
AUDIO
PARAMETER menu. The defaults, if not stated,
are listed in bold.
Important
• The
AUDIO PARAMETER menu is not
available with
MULTI IN input (see
Selecting the multichannel analog inputs
on page 32).
• Note that if a setting doesn’t appear in the
AUDIO PARAMETER menu, it is
unavailable due to the current source,
settings and status of the receiver.
1 Press RECEIVER on the remote control,
then press AUDIO PARAMETER button.
2 Use
/ to select the setting you want to
adjust.
Depending on the current status/mode of the
receiver, certain options may not be able to be
selected. Check the table below for notes on
this.
3 Use
/ to set it as necessary.
See the table below for the options available for
each setting.
4 Press RETURN to confirm and exit the
menu.
BD
TV
INPUT SELECT
SOURCE
DVR
INPUT
CH
TV CONTROL
RECEIVER
ZONE 2
ON/OFF
CD
CD-R
TUNER
ENTER
RETURN
SETUP
AUDIO
PARAMETER
TUNER EDIT
TOOLS
MASTER
VOLUME
BAND
MENU
HOME
MENU
TOP
MENU
TUNE
TUNE
P
R
E
S
E
T
P
R
E
S
E
T
RETURN
AUDIO
PARAMETER
RECEIVER
Setting
What it does
Option(s)
S.DELAY
(Sound Delay)
Some monitors have a slight delay when showing video, so
the soundtrack will be slightly out of sync with the picture.
By adding a bit of delay, you can adjust the sound to match
the presentation of the video.
0.0 to 9.0 (frames)
1 second = 25 frames
(PAL)
Default:
0.0
MIDNIGHT
a
Allows you to hear effective surround sound of movies at
low volumes.
M/L OFF
MIDNIGHT
LOUDNESS
a
Used to get good bass and treble from music sources at
low volumes.
LOUDNESS
S.RTV
b
(Sound Retriever)
When audio data is removed during the compression
process, sound quality often suffers from an uneven sound
image. The Sound Retriever feature employs new DSP
technology that helps bring CD quality sound back to
compressed 2-channel audio by restoring sound pressure
and smoothing jagged artifacts left over after
compression.
OFF
ON
DUAL MONO
c
Specifies how dual mono encoded Dolby Digital
soundtracks should be played.
CH1 –
Channel 1 is heard only
CH2 –
Channel 2 is heard only
CH1 CH2 –
Both channels heard
from front speakers
VSX_519V_MY.book 30 ページ ２００９年１月１６日 金曜日 午後７時３２分