Displaying cdp entries – Brocade Communications Systems Brocade ICX 6650 User Manual
Page 197

Brocade ICX 6650 Administration Guide
179
53-1002600-01
CDP packets
7
Syntax: show fdp neighbors [detail | ethernet <stack-unit>/<slot>/<port>]
Specify the Ethernet port in the <stack-unit>/<slot>/<port> format. Stack-unit is 1.
Displaying CDP entries
To display CDP entries for all neighbors, enter the show fdp entry command.
To display CDP entries for a specific device, specify the device ID, as shown in the following
example.
Syntax: show fdp entry * | <device-id>
Brocade# show fdp neighbors ethernet 1/1/1
Device ID: Router
Entry address(es):
IP address: 192.95.6.143
Platform: cisco RSP4, Capabilities: Router
Interface: Eth 1/1/1, Port ID (outgoing port): FastEthernet5/0/0
Holdtime : 127 seconds
Version :
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-JSV-M), Version 12.0(5)T1, RELEASE SOFTWARE
(fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 19-Aug-99 04:12 by cmong
Brocade# show fdp entry *
Device ID: Router
configured as tag-type8100
Entry address(es):
IP address: 10.20.67.98
IPv6 address (Global): 2001:DB8:2
Platform: ICX6650-64 Router, Capabilities: Router
Interface: ethernet1/1/6
Port ID (outgoing port): ethernet1/1/6 is TAGGED in following VLAN(s):
1000
Holdtime : 128 seconds
Brocade Communications Systems, Inc. ICX6650-64 Router, IronWare Version
07.5.00B1T323 23 Compiled on Jun 28 2012 at 18:54:50 labeled as ICXLR07500B1
Brocade# show fdp entry CISCO3750
Device ID: CISCO3750
Entry address(es):
Platform: cisco WS-C3750G-24TS, Capabilities: Switch, IGMP
Interface: ethernet1/1/5, Port ID (outgoing port): GigabitEthernet1/0/5
Holdtime : 130 seconds
Cisco Internetwork Operating System Software
IOS (tm) C3750 Software (C3750-I5-M), Version 12.2(18)SE, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 04-Feb-04 20:29 by antonino