Britax ROUND ABOUT 50 - Manual (Page 39)

37
Child Seat Functions
Adjusting Harness Slot Height
IMPORTANT: See Important Harness Adjustments
on pages 6 – 7 for instructions on proper harness fit
based on your child’s height and weight.
1 Loosen the harness by lifting the harness
adjuster lever while pulling both shoulder straps
forward as far as possible (Fig. E).
2 From the rear of the child seat, unhook the
shoulder harness from the harness yoke (Fig. F).
3 Pull straps through the shell, foam, and cover to
the front of the child seat.
4 Thread the harness straps through the
appropriate harness slots in the cover, foam,
and child seat shell (Fig. G).
5 Reattach harness straps to the harness yoke
(Fig. F).
6 Pull harness adjuster strap to tighten the
harness.
7 Verify all straps are threaded at the same height
and are not twisted.
E
F
G