Defi ADVANCE Control Unit (DF07701 Manufactured in and before December, 2011) User Manual
Page 18
1. Set the slide switch to
M
.
2. If the
L
button is pressed, the gauge shifts to Playback mode and
play the recorded data. The LED is blinking during Playback mode.
3. When playback finishes or the
L
button is pressed during play-
back, the gauge returns to Real mode.
7 -11-1. Operation during playback
・Playback is paused if the
M
button or the
R
button is
pressed during playback.
・If the
R
button is pressed during pause, playback goes frame by
frame. If the
R
button is pressed long during pause, it fast for-
wards playback.
・If the
M
button is pressed during pause, playback is rewound frame
by frame. If the
M
button is pressed long, during pause, playback
is rewound.
・If the
L
button is pressed during pause, playback restarts.
playback ⇔ pause ⇔ single frame step/single frame rewinding/ fast forward/ rewind
The illumination of gauges can be turned off during Playback mode.
⇒ Refer to 7 -3-3. Illumination.
7 -12. Play Peak mode (slide switch position:
M
)
During Playback, the peak value of recorded data is displayed. The needle
pointer displays minimum value as for oil pressure and fuel pressure.
1. Set the slide switch to
M
.
2. If the
L
button is pressed, the gauge shifts to Playback mode and
playbacks the data. The LED is blinking during Playback mode.
3. Set the slide switch to
U
during playback (or pause).
4. If the
M
button is pressed during playback (or pause), the gauge
displays the peak value of recorded data.
5. If the
M
button is pressed again, the gauge returns to playback
the data. To return to Real mode, set the slide switch to
M
and press
long the
L
button.
Data playback is ongoing during Play Peak mode.
■ Difference between Real peak, Rec peak, and Play peak
Real peak
Rec peak
Play peak
Displayed in
Real mode
Record mode
Playback mode
Displayed value
Peak value in all
modes
Peak value recorded in Record mode
Update of peak value In all modes
During Record mode
Peak reset
Operatable in Real
peak mode
Reset automatically when recording
is started
70
71