Defi Link VSD Concept - Manual (Page 16)

Simplified Set-up Chart
SET: Setting of units "kPa, ℃, km/h" or "PSI, ° F, MPH"
SPEED SET: Setting of speed pulse
PULSE-4: Select the proper speed pulse from 2, 4, 8, and 16.
FREE: Set speed pulse other than 2, 4, 8, or 16.
TACHO-SET: Setting of number of cylinders
ENGINE-4: Select the proper number of cylinders from 3, 4, 5, 6, and 8.
WARM-UP: Setting of warm-up function
SPECIAL: Choose ON or OFF of special display.
TACHO-REV: Setting of warning value for engine speed
TACHO-BAR: Choose ON or OFF of bar display.
WARNING-BUZZER: Choose ON or OFF of buzzer sound.
AUTO-WARNING: Choose ON or OFF of auto warning display.
DIMMER: Choose AUTO or MANUAL of illumination control.
AUTO-DIMMER: Auto dimmer control
MANUAL-DIMMER: Manual dimmer control
AUTO-LEVEL3: Select one from three levels of brightness in auto dimmer mode.
MANUAL-3: Select one from five levels of brightness in manual dimmer mode.
CONTROL-OUT: Setting of control output function
OPEN: Disconnection of wire and/or sensor is detected.
ERROR: Serial error is detected.
Refer to the operation manual for the details.
SHORT: Short circuit of wire and/or sensor is detected.