Apple Color 1.5 - Manual (Page 431)

After you click Yes, Color connects with the control surfaces on the network. If this is
successful, then each panel’s display should now go blank.
The CP200 series control surfaces are now ready for use with Color.
Controls in the CP200-BK (Trackerball/Knob Panel)
The CP200-BK has the following controls:
F1 F2 F3
F4 F5 F6
F7 F8 F9
In the Primary In and Out rooms:
• Left (Dot) button above wheels: Reset contrast slider for that zone
• Right (Circle) button above wheels: Reset color control for that zone
• Left joyball: Shadow color control adjustment
• Left wheel: Shadow contrast slider adjustment (black point)
• Center joyball: Midtone color control adjustment
• Center wheel: Midtone contrast slider adjustment (gamma)
• Right joyball: HIghlight color control adjustment
• Right wheel: HIghlight contrast slider adjustment (white point)
• F1: Toggle keyframe Interpolation
• F2: Add keyframe
• F3: Delete keyframe
• F4: Alternate panel encoders
In the Secondaries room:
• F1: Toggle keyframe Interpolation
• F2: Add keyframe
• F3: Delete keyframe
• F4: Alternate panel encoders
431 Appendix D Setting Up a Control Surface