Apple Power Macintosh 7300 series - PC Compatibility Card - Manual (Page 140)

Installing protocols for use with Network Driver Interface Specification (NDIS) 2.0
Installing NetBEUI and IPX/SPX in Windows 95
This section describes how to set up the NetBEUI and IPX/SPX protocols for
use with an NDIS driver in Windows 95. If you are using ODI, refer to this
topic in “Installing Protocols for Use With Open Data-Link Interface (ODI)”
earlier in this appendix.
1 In Windows 95, click Start, choose Settings, and then choose Control Panel.
2 Double-click the Network icon to open it.
3 Select Add; then select Adapter.
4 Select Have Disk.
5 Insert the floppy disk containing the NDIS 2.0 driver. Verify the drive; then click OK.
6 You see the message “PC Card Network Driver (NDIS2).” Click OK.
The following network items will be automatically installed:
m Client for Microsoft Networks
m Client for NetWare Networks
m PC Card Network Driver (NDIS2)
m IPX/SPX-compatible Protocol
m NetBEUI
7 Choose any custom settings you need (for example, enable file sharing).
8 Select Identification. Fill in the boxes labeled “Computer Name,” “Workgroups,” and
“Computer Description.” Then click OK.
9 Insert the Windows 95 CD when prompted to do so.
Windows 95 will install all the necessary network components.
10 Go to “Running the Network Protocol Setup (SETNET) Utility” near the end of this
appendix and follow the instructions there. Then return to this section.
140 Appendix D