Apple Motion 2 - Manual (Page 749)

Chapter 10 Using Filters 749
Ring Warp
Similar to the Ring Lens, but the image is distorted with multiple concentric rings. The
number of rings can be increased or decreased using the Radius and Refraction
parameters.
Parameters in the Inspector
Center: Sets the position of the center of the rings.
Radius: Sets the radius of the rings. Values range from 0.01 to 200.
Refraction: Sets the amount of refraction. Values range from 0 to 20.
Dashboard controls
The Dashboard contains the Radius and Refraction controls.
Ripple
Creates animated ripples over the surface of an object. This filter is automatically
animated to create an undulating effect on the surface of the affected image. The
amplitude can be adjusted to increase or decrease the rippling effect.
Parameters in the Inspector
Center: Sets the position of the origin of the effect.
Amplitude: Sets the width of the waves. Values range from 0 to 100.
Crop: Toggles whether the object is cropped at its original boundaries.
Dashboard controls
The Dashboard contains the Amplitude control.
Original image Ring Warp applied
01112.book Page 749 Sunday, March 13, 2005 10:36 PM