Snorkel AB46JE - Manual (Page 41)

Chapter 8 – Prestart Inspection
AB46JE – 0260072 37
Prestart Inspection Checklist
Item Inspect For Ok
Operator’s Manual In place, all pages readable and intact
Electrical System
Batteries Condition and charged for proper operation
Battery fluid level and terminals Proper level/clean, connectors tight
Battery charger and condition indicator Proper operation
Cables and wiring harness No wear or physical damage
Hydraulic System
Fluid level Between full and add marks
Fluid filter Verify operation in the green zone
Hoses, tubes and fittings No leaks
Tires
Foam filled Good condition
Wheels All wheel lug nuts present and properly torqued
Lower Control Station
Operating controls Proper operation
Emergency stop and emergency power Shuts off lower controls/proper operation
Level Sensor Sounds tilt alarm
Flashing Light Proper operation
All Motion Alarm Sounds when machine is operated and/or driven
Structures
Weldments – Chassis, turntable, booms, platform, etc. Welds intact, no damage or deformation
Slide pads
In place, no damage or deformation
Fasteners In place and tight
Upper Control Station
Guardrail system and lanyard anchors Welds intact, no damage or deformation
Operating controls Proper operation
Emergency stop and emergency power Shuts off upper controls/proper operation
Horn Sounds when activated
Electrical power outlet – GFCI Proper operation
Placards and Decals In place and readable