Snorkel TB60 2001 - Manual (Page 46)

8. EMERGENCY OPERATION
8 - 2 P/N 0082168
2. Set the MASTER switch (2) to ON.
3. Set the EMERGENCY STOP switch (3) to UP
FOR RUN.
4. Set the SELECTOR SWITCH (4) to GROUND.
5. Push and continue to hold the GROUND
OPERATION switch (5) up.
6. Push and hold a platform-moving switch (7)
the way you want the platform to move.
7. Push and continue to hold the EMERGENCY
POWER switch (6) down.
8. When the platform is safely retrieved, release
the switches and turn the MASTER switch (2) to
OFF.
Y
Used From the Platform-Control Box
For EMERGENCY POWER to be used from the
platform-control box, certain switch settings must
exist at the ground-control panel and in the
battery compartment. The switch settings are:
1. BATTERY switch (1) must be ON.
2. MASTER switch (2) must be ON.
3. EMERGENCY STOP (3) must be UP FOR
RUN.
4. SELECTOR SWITCH (4) must be set to
PLATFORM.
EMERGENCY POWER can now be used from
the platform-control box by doing the following:
5. Set the ANTI-RESTART MASTER SWITCH
(5) to ON.
6. Pull EMERGENCY STOP (6) up.
7. Step on the foot switch (7).
8. Push and hold a switch or controller (on top of
the platform-control box) the way you want the
platform to move.
9. Push and continue to hold EMERGENCY
POWER (8) to ON.
10. When the platform is safely retrieved, set the
MASTER switch (2) to OFF.