IKA KS 130 control - Manual (Page 34)

34 032007
Radius of the orbit mm 2
Shaking motion approximately circular
amplitude
Max. load kg 2
Dimensions (B x H x T) mm 270 x 98 x 316
Weight ( ... basic) kg 7,7
Weight ( ... control) kg 8,8
KS 130 basic
Speed setting Analog (infinitely variable)
Rotary knob on front side left
Speed display
10 LED’s with scale
in 80 rpm steps
Max. speed deviation from idle:% ±10
Time setting three indexing positions /
Rotary knob on the front key button 10 steps from
side right 5 - 50 min in 5 min steps
Time display 10 LED’s with scale in
5 min steps
Max. time deviation from idle % ±1
KS 130 control
Speed setting Digital
Rotary knob on the front side left (1 step = 10 1/min)
Speed display LCD - Display
Max. speed deviation from idle% ±1
Time setting Digital
Rotary knob on the front (1 step = 1 rpm)
side right
Time display: LCD - Display
max. 9h 59min
Max. time deviation from idle % ±1
Interface RS 232 C / analog
Subject to technical changes!
AS 130.1 Universal attachment
AS 130.2 Holding bracket adapter
AS 130.3 Dish attachment
AS 130.4 Reactant glass adapter
(KS 130 control version only)
PC 5.1
Adapter IKA - Control
PC 1.5 Cable
PC 2.1 Cable AK 2.1 Cable
PC 1.2 Adapter AK 2.2 Cable
Design voltage VAC 230± 10%
or VAC 115± 10%
Design frequency Hz 50/60
Input power W 45
Speed range 1/min 0 - 800
Perm. duration of operation % 100
Perm. ambient temperature °C +5 to +50
Perm. relative humidity % 80
Protection class acc. to IP 21
DIN EN 60529
Protection class
I
Overvoltage category II
Contamination level 2
Operation at a terrestrial
altitude m max. 2000 above sea level
Drive Speedcontrol asyn-
chronous motor
Protection at overloaded Temperature sensor
in motor winding
Fuses on apparatus plug A T1AL (Id-Nr. 13 637 00)
Accessories
Technical data