Eppendorf epMotion 5075 - Manual (Page 37)

Hardware
epMotion ® 5075
English (EN)
37
5.3 Thermal module
Based on the model, your epMotion can be equipped with one or more thermal modules.
5.3.1 Safety notes
5.3.2 Configuration
Abb. 5-7: Thermal module
Fig. 5-7: Thermal module
Thermal modules temper liquids in a temperature range of 0 °C – 110 °C.
WARNING! Danger due to flammable or explosive liquids.
 Do not use explosive substances.
 Do not heat any highly flammable substances.
 Heat highly flammable substances in small quantities below boiling point only.
 Do not exceed the boiling point of solutions.
CAUTION! Burns from hot metal surfaces.
The metal surface heats up during operation. The software displays the current temperature of
the metal surface.
 Wait until the metal surface has cooled down completely.
CAUTION! Burns from hot labware.
Labware will be tempered during operation.
 Do not touch temperature-controlled labware.
 Wait until the labware has cooled down completely.
NOTICE! Material damage due to non-heat-resistant labware.
Samples and labware will become damaged if you do not use heat-resistant labware.
 Observe the labware specifications.
 At set temperatures in excess of 100 °C, only use labware made of metal, polypropylene
(PP) or polycarbonate (PC).