JLG 10MSP Operator Manual - Manual (Page 39)

SECTION 3 - MACHINE OPERATION
3121227 – JLG Lift – 3-11
Platform/Off/Ground Selector Switch NOTE: SLEEP MODE - During operation if no control functions
have been activated for 5 minutes (default programmable
setting), the ground control module will power the
machine down to conserve battery power. Cycle power
back on using either the main power selector switch (key)
or the emergency stop/power down button either on the
platform controller or on the ground control station.
Emergency Stop/Shut Down Button
POWER OFF
Turn to this position to power machine
off after use.
PLATFORM CONTROL MODE
When set to this position the machine
can be operated from the platform con-
trol console.
GROUND CONTROL MODE
When set to this position the machine
can be operated from the ground control
station.
POWER OFF
PUSH IN - To Engage
Emergency Stop
POWER ON
TURN CLOCKWISE
and RELEASE to RESET
Emergency Stop