JLG 10MSP Operator Manual - Manual (Page 77)

SECTION 5 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3121227 – JLG Lift – 5-3
Electrical Specifications Platform Data
SPECIFICATION 10MSP
System Voltage: 24 Volts DC
Battery Specifications: Battery Type: AGM (VRLA) (Sealed)
Voltage: (2) - 12 Volt DC (Standard)
or
(4) - 6 Volt DC (Option)
Amp Hour (AH) Rating: 12V - 100 Amp Hr. @ 20 Hr.
6V - 210 Amp Hr. @ 20 Hr.
Battery Charger: Input: 120/240 Volts AC - 50/60 Hz -
Voltage Selectable
Output: 24 volt, 20 Amp Output -
with 2 Amp Finish
SPECIFICATION 10MSP
Occupants: (Persons allowed in Platform) 1
Maximum Work Load (Capacity): Platform: 350 lb.
(160kg)
Material Tray: 250 lb.
(115kg)
Carry Deck Capacity: 250 lb.
(115kg)
Platform Entry Height:
(Ground to Platform Floor) 13.5 in.
(34.3cm)
Platform Height - Mast Fully Extended -
(Ground to Platform Floor): 10 ft. (3m)
* 7 ft. (2m)
Platform Cycle Performance: Lift Up: 13 sec.
(in seconds) (w/max. rated load) Lift Down: 9 - 13 sec.
* Only on machines equipped with the 7 ft. platform height limit OPTION.