JLG X550AJ Operator Manual - Manual (Page 65)

SECTION 4 - MACHINE OPERATION
3128791 – JLG Lift – 4-21
THE BATTERY CHARGER SUPPLIED WITH THE LIFT WAS DESIGNED
TO ENSURE SAFE AND RELIABLE PERFORMANCE. IT IS ALREADY
FITTED ON THE MACHINE AND DOES NOT NEED ANY ADJUSTMENT
OR CONFIGURATION BY THE USER; NONETHELESS, TO AVOID
INJURY AND DAMAGE TO THE BATTERY CHARGER, THE FOLLOW-
ING ESSENTIAL PRECAUTIONS MUST BE OBSERVED:
• Carefully read the installation instructions contained in
this manual. For future reference, keep the manual in a
safe place.
• Do not place the battery charger near sources of heat.
• As the battery charger is sealed and without forced venti-
lation, its performance depends on the ambient temper-
ature and the type of installation.
• Be certain the type of power supply available corre-
sponds to the voltage specified and indicated on the bat-
tery charger rating plate or in this Operation/
Maintenance Manual. If any questions, contact your
local JLG Service Center or the local electrical company.
• An AC class circuit breaker can be used as protection
device for the battery charger power supply, however it
is recommended to use a class A or even better class B
device.
• In regard to safety and electromagnetic compatibility, the
battery charger features a three pin plug with ground,
which can only be plugged into an grounded socket. If
the plug does not go into the socket, most probably the
1
2