Brother DCP-1400 - Manual (Page 35)

C U S T O M S E T T I N G S 4 - 2
Setting Cassette Usage
The default setting of AUTO allows your DCP to choose the optional Cassette
#2 if paper is out in Cassette #1 or if incoming faxes will fit best on the paper in
Cassette #2. Choose
CASSETTE#1 ONLY , CASSETTE#2 ONLY or
CASSETTE USAGE if you want to keep special paper in the other cassette and
control when it is used.
1
Press Menu/Set, 1, 1, 3.
2
Press or to select CASSETTE
USAGE , and then press Menu/Set.
3
Press or to select AUTO , CASSETTE#1 ONLY or CASSETTE#2
ONLY , and then press Menu/Set.
4
Press Stop.
Setting the Print Density
You can adjust print density, making your printed pages darker or lighter than
the original.
1
Press Menu/Set, 1, 4.
2
Press to make print lighter, or to
make print darker, and then press Menu/Set.
3
Press Stop .
Toner Save
You can conserve toner using this feature. When you set Toner Save to ON print
appears somewhat lighter. The default setting is OFF .
1
Press Menu/Set, 1, 5.
2
Press or to select
ON (or OFF ) and then press Menu/Set.
3
Press Stop.
3.CASSETTE USAGE
4.PRINT DENSITY
5.TONER SAVE