2N BRI Lite/Enterprise v1.1 - Manual (Page 93)

Status Messages 6.4
93
Command Shell Statuses
Command Row Message Status
ID
Name Description
0 IDLE Rest status, awaiting AT commands
1 REQUEST Communication with GSM module upon AT&G command is displayed
2 REPORT Active tracing
3 LOGFILE Content of log file is being written out
4 CALLFILE Content of call file is being written out
5 CALLREAD Call file records are read
6 AUTOFILE Content of incoming call autorouting chart is being written out
7 QUERY (not used so far)
8 SCREEN (not used so far)
9 MATRIX Active matrix screensaver
10 FUNCFILE Content of debug file is being written out
11 LCRFILE (not used so far)
Telnet Message Status
ID
Name Description
0 LOGOUT User logged-out
1 LOGIN User is entering name
2 PASSW User is entering password
3 IDLE User logged-in
Records of Events and Calls
Records on Events and Calls
ID
Name Description
0 POWER System power on, power off or reset
1 INIT Initialization of EEPROM (configuration) or flash (upgrade)
3 SYSERR System error (memory error, etc.)
8 L1-ERR BRI port layer 1 error (ISDN1)
9 L2-ERR BRI port layer 2 error (ISDN2)
10 L3-ERR BRI port layer 3 error (ISDN3)
12 G2-ERR GSM module layer 2 error (gate2)
13 G3-ERR GSM module layer 3 error (gate3)
14 C4-ERR Link layer error (call4)
Types of CDRs
ID
Name Description
0 I-FD Not connected incoming call attempt
1 I-OK Connected incoming call
8 O-FD Not connected outgoing call attempt
9 O-OK Connected outgoing call