AirLive WN-350R - Manual (Page 131)

3. Advanced Functions
WN-350R User’s Manual 122
TCP Port to Open (4): This is the out going (Outbound) range of TCP port
numbers for this particular application.
UDP Port to Open (5): This is the out going (Outbound) range of UDP port
numbers for this particular application.
Comment (6): The description of this setting.
Popula This section lists the more popular applications that
Applications (7): require multiple connections. Select an application from
the Popular Applications selection and click ‘Add’ to
save the setting to ‘Current Trigger-Port Table.’
Add (8): Add the setting to the ‘Current Trigger-Port Table.’
Reset (9): Click ‘Reset’ will clear all above setting and you can set
up again.
Current All the settings for the special applications will be
Trigger-Port (10): listed here. If you want to remove some Special
Application settings from the “Current Trigger-Port
Table", select the Special Application settings you want
to remove in the table and then click "Delete Selected".
If you want remove all Special Appliacation settings
from the table, just click "Delete All" button. Click
"Reset" will clear your current selections.
Delete (11): Please select a special application by clicking the
‘Select’ box of the mapping, then click ‘Delete Selected’
button to remove the setting. If there’s no setting here,
this button will be grayed out.