AirLive WN-350R - Manual (Page 140)

3. Advanced Functions
131 WN-350R User’s Manual
Comment (4): You can input any text here as the comment of this
MAC address, like ‘ROOM 2A Computer’ or anything.
You can input up to 16 alphanumerical characters here.
This is optional and you can leave it blank, however, it’s
recommended to use this field to write a comment for
every MAC addresses as a memory aid.
Add (5): Click ‘Add’ button to add the MAC address and
associated comment to the MAC address filtering table.
Reset (6): Remove all inputted values.
Current MAC All existing MAC addresses in filtering table
Filtering Table (7): will be listed here.
Delete (8): If you want to delete a specific MAC address entry,
check the ‘select’ box of the MAC address you want to
delete, then click ‘Delete Selected’ button. (You can
select more than one MAC addresses).
Delete All (9): If you want to delete all MAC addresses listed here,
please click ‘Delete All’ button.
Reset (10): You can also click ‘Reset’ button to unselect all MAC
addresses.
Enable IP Check this box to enable IP address based
Filtering (11): filtering, and please select ‘Deny’ or ‘Allow’ to decide the
behavior of IP filtering table. If you select deny, all IP
addresses listed in filtering table will be denied from
connecting to the network; if you select allow, only IP
addresses listed in filtering table will be able to connect
to the network, and rejecting all other network devices.