Nanodac – Carbolite nanodac User Manual
Page 82
Advertising
nanodac™
MC27 –EN– 1.04
80
TO ENABLE OEM SECURITY
In ‘OEMEntry’ enter the security code. This is the same code as entered in Engineer level in ‘OEMPass’.
The ‘OEMStatus’ parameter will change to ‘Locked’.
Figure 3.6.10f
As in Figure 3.6.10f above, the parameter ‘TimeFormat’ is alterable in Engineer level and the parameter
‘Loop1 Proportional Band’ is locked when OEM security is enabled.
Advertising